Sharp AM-300 ユーザーズマニュアル

Selecting Temporary Copy Settings

If the memory becomes full while multiple originals are being scanned using 
the auto document feeder, MEMORY IS FULL will appear in the display.

♦

Press 

 if you want to make copies of only the originals that have 

already been scanned. The remaining originals will be ejected from the 
feeder. 

♦

Press 

 if you want to cancel the copy job.

You can adjust one or more of the following temporary copy settings before 

pressing 

 to begin copying.

Press 

 one or more times until the desired enlargement or reduction 

percentage appears in the display. The preset percentages are 100%, 78%, 
70%, 64%, 50%, 25%, 400%, 200%, 141% and 129%. (The preset 
percentages are different in some countries.)

78%:

Legal --> Letter

70%:

A4 --> A5

64%:

Letter --> A5

141%:

A5 --> A4

129%:

Letter --> Legal

♦

After selecting one of the above preset percentages, you can also press 

 or 

 to increase or decrease the percentage in increments of 1%. 

The maximum  percentage is 400% and the minimum percentage is 25%.

When the desired percentage appears, press the 

 key.