Sharp DX-B350P ユーザーズマニュアル

Text is blurred.

Is the paper damp?

Replace with paper from a new ream.

Is the correct type of paper used?

Load the correct type of paper.

There is no power.

Is the power switched off?

Press the printer switch to the <I> position to turn 
the power on. 

Is the power cord disconnected or not securely 
connected?

Switch off the power and connect the cord to the 
power outlet and printer again. Then, switch on 
the power.

Is the power cord connected to a power outlet 
with the correct voltage?

Connect the printer exclusively to an outlet with a 
suitable voltage rating and current rating. 

Power is interrupted 
frequently.

Printer may have malfunctioned. 

Switch off the power to the printer, remove the 
plug from the power outlet and contact Technical 
Support. 

Is the power cord disconnected or not securely 
connected?

Switch off the power and connect the cord to the 
power outlet and printer again. Then, switch on 
the power.

Print instruction was sent but 
processing did not start.

Is the fault indicator lit?
Is the print-ready indicator off?

Carry out the action according to the 
status of the indicator.

Is there any message displayed on the 
Operator panel?

Check the message, then carry out the 
action. 

Is there any message displayed in the 
computer?

Check the message, then carry out the 
action.