Sharp DX-B350P ユーザーズマニュアル

When there is a paper jam, refer to the following 
procedures and follow the instructions.

Paper jams could be due to the printer installation
environment and type of paper used. 

The diagram below shows the printer with the two optional 
tray modules, duplex module, and Offset Catch Tray 
installed. 

If the jammed paper is removed without opening the
top cover, you still need to open and close the top
cover. Doing this will remove the error message. 

CAUTION: Never touch areas labeled as “High 
Voltage.” Never touch a labeled area found on or 
near the heat roller. If a sheet of paper is wrapped 
around the heat roller, do not try to remove it by 
yourself to avoid injuries or burns. Switch off the 
machine immediately, and contact your service 
provider.

•