Sharp DX-B350P ユーザーズマニュアル

The System menu allows you to specify system-level operation of the printer during normal and 
certain error conditions. Items available in this menu are described below

Factory Defaults

U.S.
Non-U.S.

U.S. for 110V
Non-U.S. for 
230V

Resets the menu to factory defaults. You 
change these defaults by changing the 
options in the Operator Panel; however, 
settings in the driver will override Operator 
Panel settings.

Save Config

Saves current configuration.

Restore Config

Restores configuration.

Toner Low

Stop
Continue

Stop

Stop printing or Continue printing when the 
Toner Low message is first displayed.
When the print cartridge is low on toner, the 
Operator Panel displays this message. The 
printer normally has about 500 pages left to 
print before the print density fades. In its 
default state, the printer will stop printing 
when it detects the toner is low. You can 
continue printing by pressing the START/
STOP button. The printer will then continue 
printing indefinitely without operator 
intervention, even if it runs out of toner. The 
warning message remains displayed on the 
Operator Panel. If the printer is set to 
Continue after Toner Low, the printer will 
not stop and will continue to print even with 
no toner available.

Display Language

English
Francais
Deutsch
Italiano 
Espanol
Dutch
Danish
Norwegian
Swedish

English

Change the language of the display 
messages. 

Power Save

3-120

15 

Set the time in minutes since last print 
before entering Power Save mode. See 
“Power Save Mode” on page 2-17 for more 
information.

Wait Timeout

00000 - 99999

00020

Increase or decrease the length of time (in 
seconds) that the printer will remain in the 
waiting state—a job is being processed, no 
end-of-file has been detected, and there is no 
more data to process. This setting applies to 
both PCL and PostScript print jobs.