Savin RCP40 ユーザーズマニュアル
Basic Printing
32
3
Printing without proof printing
Note
❒ “Auto-Print after Master Making” in Auto On Line status is available to Win-
dows 2000/XP only.
AAAA
Click “Auto-Print after Master Making” in [Printer features], and then select
“On” in the [Change Setting for] box.
“On” in the [Change Setting for] box.
BBBB
Click [Apply], and then [OK].
CCCC
Enter the number of prints required, and select the print range.
DDDD
Click [OK] to start printing.
When the machine receives data from the computer, it enters the online status
and Data In indicator flashes.
When the machine receives data from the computer, it enters the online status
and Data In indicator flashes.
Note
❒ To stop the machine before Master Making, press [Job Reset] (When using
Type B, press the
{{{{Job Reset}}}} key). However, for a page where Master
Making has begun, Master Making cannot be cancelled even if [Job Reset]
(When using Type B, press the
(When using Type B, press the
{{{{Job Reset}}}} key) is pressed.
❒ To stop the machine during printing, press the {{{{Clear/Stop}}}} key. If there is
incoming data from the computer to the machine, press [Job Reset] (When
using Type B, press the
using Type B, press the
{{{{Job Reset}}}} key) to clear it.
Printing after proof printing
Note
❒ “Auto-Print after Master Making” in Auto On Line status is available to Win-
dows 2000/XP only.
AAAA
Click “Auto-Print after Master Making” in [Printer features], and then select
“Off” in the [Change Setting for] box.
“Off” in the [Change Setting for] box.
BBBB
Click [Apply], and then [OK].
CCCC
Enter the number of prints required, and select the print range.
DDDD
Click [OK] to start printing.
When the machine receives data from the computer, it enters the online status
and Data In indicator flashes. The Proof Printing page is output.
When the machine receives data from the computer, it enters the online status
and Data In indicator flashes. The Proof Printing page is output.
Note
❒ To stop the machine before Master Making, press [Job Reset] (When using
Type B, press the
{{{{Job Reset}}}} key).
❒ If the {{{{Proof}}}} key is pressed, Proof Printing can be performed again.