Sharp MX-C300P ユーザーズマニュアル
69
TROUBLESHOOTING
3
Close the auxiliary tray and then the
bypass tray, grasp the side cover
open/close handle, and gently open
and close the side cover.
bypass tray, grasp the side cover
open/close handle, and gently open
and close the side cover.
The message "
Clear paper path." will be
cleared and printing will be possible.
3
Grasp the side cover open/close
handle and gently open the side
cover.
handle and gently open the side
cover.
4
Turn the paper feed knob and feed out
the paper that is inside. ("Misfeed in
the paper feed area A" (p.70))
the paper that is inside. ("Misfeed in
the paper feed area A" (p.70))
5
Close the side cover.
The message "
Clear paper path." will be
cleared and printing will be possible.
MISFEED IN THE MACHINE
To remove a misfeed from inside the machine, open the side cover, check whether the misfeed occurred in "A", "B",
or "C" below, and follow the misfeed removal procedure.
or "C" below, and follow the misfeed removal procedure.
1
Open the bypass tray and the side cover.
2
Check the misfeed location.
If you were able to remove the misfed paper
(1)
(2)
If you are unable to remove the misfed paper
If paper remains in the bypass tray, remove the paper.
("MISFEED IN THE BYPASS TRAY" (p.68))
("MISFEED IN THE BYPASS TRAY" (p.68))
Note
If paper is misfed here, go to
"Misfeed in the paper feed
area A" (p.70).
"Misfeed in the paper feed
area A" (p.70).
If the misfed paper is visible
here, go to "Misfeed in the
fusing area B" (p.70).
here, go to "Misfeed in the
fusing area B" (p.70).
Area B
Area A
Area C