Sharp MX-C300P ユーザーズマニュアル

This setting is used to stop a setting from changing 
continuously when the [

] or [

] key is held down, 

such as selecting a menu item (auto key repeat will not 
operate). When this setting is enabled, a key must be 
pressed repeatedly instead of holding it down.
Auto key repeat is initially set to operate (factory 
default setting).

This setting is used to disable "Paper Size Set" in the 
special functions menu. When disabled, "Paper Size 
Set" cannot be used when the [Special Function] key 
(

) is pressed, which prevents users other than the 

administrator from easily changing the paper size 
setting.
"Disable Paper Size Set" is initially disabled (factory 
default setting).

These settings are used to configure energy saving 
settings. To access one of these settings, select 
"Energy Save" in the mode selection screen, and 
select the desired setting in the energy save screen, 
and then press the [OK] key.

This setting is used to enable auto power shut-off 
mode, which automatically turns off the power to the 
fusing unit if the operation panel is not used for a 
certain duration of time.
Enabling auto power shut-off mode helps conserve 
energy, preserve natural resources, and reduce 
environmental pollution.
The function is initially enabled.

This setting is used to set the duration of time until 
auto power shut-off mode activates when the 
operation panel is not used. Using this function helps 
conserve energy, preserve natural resources, and 
reduce environmental pollution.
"1 min.", "3 min.", "5 min.", "10 min.", "15 min.", 
"30 min.", "45 min." or "60 min." can be selected for the 
duration of time. Select a setting that suits your work 
conditions.

This setting is used to set the duration of time until 
preheat mode, which automatically lowers the fusing 
unit temperature, activates when the operation panel is 
not used. Using this function helps conserve energy, 
preserve natural resources, and reduce environmental 
pollution. "1 min.", "3 min.", "5 min.", "10 min.", 
"15 min.", "30 min.", "45 min." or "60 min." can be 
selected for the duration of time. Select a setting that 
suits your work conditions.

When the machine completes a print job received from 
the PC, the machine immediately returns to the Auto 
Power Shut-Off mode.

You can reduce the amount of toner used for printing.

This is used to print lists and reports that are only for 
use by the administrator of the machine.
Select the [List Print] to configure the settings.
• User Info. Print

The user name, user number, paper used, paper 
limits, and function permission settings can be 
printed for each user.

Rather than disabling the auto power 
shut-off feature, it is recommended that you 
first try lengthening the time set in "Auto 
Power Shut-Off Timer" (see below). In most 
cases a suitable timer setting will allow work 
to proceed with minimal delay and still 
enable you to enjoy the benefits of power 
conservation.

Toner Save Mode is only effective when the 
machine's printer driver is not used. When 
the printer driver is used, the printer driver 
setting takes precedence. 
This function may not operate in some 
applications and operating systems.