Sharp AJ-2200 ユーザーズマニュアル
8
PART NAMES AND FUNCTIONS
Bypass tray
Use this tray to print on a single page.
When printing large banners, make sure to
use this tray. Insert paper into the tray print
side up. When printing onto thick paper,
open the tray until it reaches position 2.
(The tray has two stop positions.)
When printing large banners, make sure to
use this tray. Insert paper into the tray print
side up. When printing onto thick paper,
open the tray until it reaches position 2.
(The tray has two stop positions.)
Power socket
Plug the power cord *
into the socket.
into the socket.
Parallel interface
connector (36pin)
connector (36pin)
Use a parallel interface cable
(IEEE1284) to connect the
printer to your computer.
(IEEE1284) to connect the
printer to your computer.
USB interface connector (B type)
Use a USB cable to connect the printer
to your computer. It is possible to insert
the cable after the printer has been
switched on.
to your computer. It is possible to insert
the cable after the printer has been
switched on.
Jam cover
Open this cover to remove
jammed paper.
jammed paper.
Rear Side
* When the power cord is connected to the outlet, power for the printer is turned on automatically.