Sharp AJ-2200 ユーザーズマニュアル
20
LOADING PAPER INTO THE PAPER TRAY
When loading index cards, postcards or birthday cards
1) Set the paper knob to the "Thick Paper (
)" setting, and then load the
card print side down.
2) Set guide
up, and then fit guide
and
against the loaded cards.
5
Close the front lid of paper tray by firmly pushing on its right
edge.
edge.
6
Attach the output tray.
zMost paper and envelopes will be fed correctly from the paper tray. However, if
paper or envelopes are particularly stiff or heavy, they should be fed one at a
time through the bypass tray. This will avoid wrinkling or misfeeding.
time through the bypass tray. This will avoid wrinkling or misfeeding.
zIt is recommended that you perform test printing on normal paper before printing
on the card.
With some sizes of paper, guide
may stick out of the paper tray. In this case,
print with the front lid of the paper tray open.
Be sure to load in
portrait direction.
portrait direction.
Place this projection
toward the printer.
toward the printer.