Xerox 100 ユーザーズマニュアル

ページ / 160
Supplies
A-14
 Installation Planning Guide
Fuser agent
Fuser agent (the lubricant for the printer fuser) is a consumable 
item required by the printer. The consumption rate of Xerox fuser 
agent is approximately one bottle per 250,000 pages. For 
product information, refer to the consumable supplies table in 
this appendix.
US only: You should keep at least two boxes (each box contains 
one bottle) on hand for installation by the service representative. 
Developer
Developer is not consumed by the printer but does have an 
effective life of approximately 1,000,000 pages per carton 
(600,000 per carton for MICR developer). Both kinds of 
developer are guaranteed by Xerox for 600,000 pages per 
carton. Developer is a required item and must be kept on hand. 
Use only the developer specified for use in your printer.
CAUTION
The DP 100/115/135/155/180 MICR EPS printers require a 
different developer, with a different part number, from the 
developer used in the standard DP EPS printer. Be sure you use 
only designated MICR developer in the MICR printers. 
The developer is changed by your service representative. For 
product information, refer to the consumable supplies table in 
this appendix.
Diskettes
Diskettes are optional items that provide loading and backup of 
fonts, forms, and user files to and from the printing system. The 
processor accepts 3.5-inch, 1.44 MB, double-sided, high density 
diskettes.
Cartridge tapes
The quarter-inch cartridge (QIC) tape drive uses 150 MB and 
8GB cartridge tapes.