Samsung CLP-350 ユーザーガイド

.2   

<Maintenance>

Extend the top handle on the imaging unit and then use it to pull the 
imaging unit out of the machine completely.

• Do not touch the green surface on the imaging unit with your 

hands or any other material. Use the handle on it in order to 
avoid touching this area.

• Be careful not to scratch the surface of the imaging unit.
• To prevent damage, do not expose the imaging unit to light for 

more than a few minutes. Cover it with a piece of paper to 
protect it if necessary.

Look inside the machine. Remove any dust, paper particles, and 
spilled toner with a damp, soft lint-free cloth.

After cleaning, let the machine to dry completely.

If your machine or its surrounding is contaminated with toner, 

we recommend you to use a cloth or tissue dampened with 

water to clean it. If you use a vacum cleaner, toner blows into 

the air then might be harmful to you.

Pull the imaging unit about half and push it until it sounds 'click'. 
Repeat this action two or three times. 

Push the imaging unit until it sounds 'click' in to the machine. 

Close the front cover firmly. 

If the front cover is not completely closed, the macnine will not 

operate. Please make sure all toner cartridges are installed 

properly. If any toner cartridge is installed improperly, the front 

cover do not close.

Plug the power cord in and turn the machine on.