Xerox 180 EPS ユーザーズマニュアル
Operator Guide
2-5
Managing the printer
1. Paper edge guide lines
2. Loading instructions
Do the following:
•
Remove any damaged sheets.
•
Trays 1 and 2: Load paper with the wrapper seam side up.
•
Trays 3, 4, 5 and 6: Load paper with the curl side up. If you
do not see any curl, load the paper with the wrapper seam
side down.
do not see any curl, load the paper with the wrapper seam
side down.
•
Fan predrilled paper fan thoroughly and remove any paper
plugs.
plugs.
•
Load transparencies and 9-inch / 229 mm tabs into trays 1
and 2 only.
and 2 only.
•
Ensure that the paper is loaded into the right front corner of
the tray.
the tray.
CAUTION: Do not load above the MAX line on the paper guide.
Figure 2-6 Maximum fill line
•
After loading paper in tray 1 or 2, adjust the rear guide to
touch the paper stack.
touch the paper stack.
•
In tray 3, 4, 5, or 6, adjust the rear and side paper guides
to touch the stack.
to touch the stack.