Infocus IN5144a ユーザーズマニュアル

15

  Press the ◄ button to return to the previous menu, or press the ► button to 

save the setting. (

19)

 • If DUAL is selected, a menu to select MAIN or SUB appears on screen 

when a button on the projector's control panel or remote control is pressed. 

Select the projector that you want to operate. Refer to the examples below:

-  When the 

MENU button is pressed, a menu to select MAIN or SUB is 

displayed. If MAIN is selected, the Main projector’s EASY MENU or 

ADVANCED MENU is displayed.

- When one of the buttons from 

KEYSTONE, FOCUS + / -, ZOOM, ZOOM + / - 

and 

LENS SHIFT is pressed, a menu to select MAIN or SUB is displayed. If 

MAIN is selected, each menu or dialog of the Main projector is displayed.

- <Only for 

IN5142, IN5144, IN5144a and IN5145> 

When the 

ENTER button is pressed for three seconds, a menu to select MAIN 

or SUB is displayed. If MAIN is selected, the Status Monitor on the Main 

Projector can be operated.

• When DUAL is selected for LAMP MODE, the following restrictions are in 

effect:

-  AUTO POWER OFF and 

FREEZE functions on both 

projectors are disabled.

-  The test patterns for CUSTOM of 

GAMMA and COLOR TEMP are 

not displayed.

-  The projectors take a little 

longer to turn on. This is not a 

malfunction.

• In some cases when DUAL is 

selected, the screen may appear 

darker when an OSD is displayed.





Select DUAL or ALTERNATE lamp operation mode.

  Highlight LAMP MODE in the STACK menu with 

the ▲/▼ buttons, then press the ► button to 

display the LAMP MODE dialog.

  Use the ▲/▼ buttons in the dialog to highlight DUAL or ALTERNATE. 

DUAL: Turns on the projectors simultaneously.  

ALTERNATE: Turns on the projectors alternately.