Infocus IN5145 ユーザーズマニュアル

12

 • For details on PERFECT FIT, refer to 

 in 

the 

 or 

 as described in the 

.

• We strongly recommend using a flat screen. If a curved or skewed screen is 

used, it is very difficult to align the two images even if you use the pin/barrel 

adjustment of PERFECT FIT.
• Even after finely adjusting the images from the two projectors, you may not be 

able to superimpose the images sufficiently depending on the input signals. If 

this is the case, try the following methods:

-  Press the 

AUTO button on the remote control or execute AUTO ADJUST 

EXECUTE (

 → 

) on each of the projectors.

-  Adjust H POSITION and V POSITION

 

(

 → 

) 

on each of the projectors.

-  Check the RESOLUTION settings in the INPUT menu, and modify the settings 

so that Main and Sub are identical. (

 → 

) 

 Using PERFECT FIT on Set 

B, adjust the image size 

and position of Set 

B to superimpose onto the image 

of Set 

A. We recommend the following adjustments:

(1) Roughly adjust the four corners in the order below.

Top left → Top right → Bottom right → Bottom left

(2) Fine adjust the four corners in the same way.

 Press the 

MENU button on the remote control to display the menu on Set A.

 Use the ▲/▼/◄/► buttons to open the TEMPLATE 

dialog, then select STACK on the dialog. 

(

 → 

)

 Press the 

MENU button on Set B’s control panel to 

display the menu.

 Use the ▲/▼/◄/► buttons to select PERFECT 

FIT from EASY MENU, or the SETUP menu of 

ADVANCED MENU. (

 → 

 or 

)  

PERFECT FIT dialog appears on screen. 

Select the test pattern icon   shown in the lower 

left of the dialog with the ◄/▼ buttons. When you 

press the 

ENTER or INPUT button, the test pattern 

appears or disappears.