Infocus IN5144 ユーザーズマニュアル

16

NOTE • When DUAL is selected for LAMP MODE, the images projected from 

the Main and Sub projectors can be different. We recommend setting up the 

projectors as follows:

-  Select the same image for TEMPLATE and START UP on the Main and Sub 

projectors.

-  Capture the same image for MyScreen on the Main and Sub projectors.

-  Save the same image on MY IMAGE on the Main and Sub projectors.

-  Set the same message content for the Messenger function (

 

→ 

) on the Main and Sub projectors.

• When DUAL is selected for LAMP MODE, image shift can cause image quality 

degradation on the screen. Before adjusting the image position, adjust the 

INSTALLATION settings first because changing the INSTALLATION settings will 

affect the image position. (

 → 

) 

• When ALTERNATE is selected and a malfunction causes the projector's lamp 

to turn off, the other projector will automatically start to operate. However the 

other projector will not turn on, if the RS-232 cable is disconnected or if AC 

power is not supplied.
• When PIN LOCK or TRANSITION DETECTOR on both projectors is set to ON 

(

 → 

), neither projector will turn on even if 

ALTERNATE is selected. Enter the security code on both projectors and one of 

the projectors will turn on.
• When Intelligent Stack is in use, the 

POWER indicator on the projector 

operates differently than normal (

 → 

). When 

both the Main and Sub projectors are in standby mode and the 

ON button on 

the remote control or the 

STANDBY/ON button of the Main projector is pressed, 

the Main projector determines which projector to turn on according to the 

STACK MODE setting.

-  The 

POWER indicator on the Main projector blinks green while the Main 

projector determines which projector to turn on.

-  If the Main projector is turned on, the 

POWER indicator on the Main projector 

turns to steady green after lighting up, as normal.

-  If the Sub projector is turned on, the 

POWER indicator on the Main projector 

lights orange after the Sub projector is turned on.

-  If an error occurs on the Main projector, the Sub projector turns on and the 

POWER indicator on the Main projector lights or blinks red.