Accton Technology 1000BASE-SX Gigabit Uplink Module ユーザーズマニュアル
Description of Hardware
3
Keep the original faceplate for future use. If you should remove the module,
replace the faceplate to prevent dust and debris from entering the unit and to
maintain proper air flow.
replace the faceplate to prevent dust and debris from entering the unit and to
maintain proper air flow.
5.
Insert the new module into the switch: Holding the new module with the text
on the front panel upright, carefully slide the module into the lower right slot on
the rear panel, and press gently until it snaps into place. Be sure the new
module’s front panel is flush with the switch panel.
on the front panel upright, carefully slide the module into the lower right slot on
the rear panel, and press gently until it snaps into place. Be sure the new
module’s front panel is flush with the switch panel.
Note: Media expansion modules can only be placed in the lower slot.