Vidikron 30 ユーザーズマニュアル

SD Enhance: The SD Enhance menu gives you options for improving the quality of 
standard-definition, 480i images. (For 480p and higher-definition images, the controls in this 
menu are disabled.) Keep in mind that these controls add frequencies that are not present in 
the original signal, and may make images appear “noisy” if misused. 

• H Enhance/V Enhance: These controls can improve the apparent horizontal and/or 

vertical resolution of the image. 

• Chroma Enhance: This control adds chroma (color information) to the input signal and 

can make colors appear more vibrant and saturated. 

• H Threshold/V Threshold/Chroma Threshold: Set these to +11 or higher to activate the 

enhancement controls described above. Generally, the higher the threshold, the more 
noticeable the enhancements you make will be. 

Cinema

CINEMA

 

Select Cinema to view 2.35 
source material in its native 
aspect ratio.

With a 16:9 screen and a 
non-CineWide projector (no 
anamorphic lens), the upper 
and lower portions of the 
screen are masked, but the 
geometry of the active 
image area is unchanged.

With a 2.35:1 screen and a 
CineWide-equipped 
projector, the projector 
enlarges the 2.35:1 image so 
that the active image area 
fills the 16:9 chip surface, 
eliminating the black bars. 
The secondary anamorphic 
lens then vertically 
compresses the image to fit 
a 2.35:1 screen. 

Cinema Fill

C-FILL

A 16:9 image is scaled 
NON-linearly (more on the 
sides than in the center) to 
fit a 2.35:1 screen. 

 

 

Cinema Fill is available only 
on the Vision 30/CineWide 
and Vision 30ET/CineWide. 

2.35:1 Image on

16:9 Screen

(without CineWide)

2.35:1 Image on

2.35:1 Screen

(with CineWide)

16:9 Image on

2.35:1 Screen with

Cinema Fill

16:9 Image on

2.35:1 Screen

16:9 Image on

2.35:1 Screen