ZyXEL Communications P-2302HWL-P1 Series ユーザーズマニュアル
P-2302HW/HWL-P1 Series User’s Guide
96
Chapter 5 Wireless LAN
5.4.3 WPA(2)-PSK
In order to configure and enable WPA-PSK authentication; click Network > Wireless LAN to
display the General screen. Select WPA-PSK or WPA2-PSK from the Security Mode list.
display the General screen. Select WPA-PSK or WPA2-PSK from the Security Mode list.
Figure 42 Wireless: WPA(2)-PSK
The following table describes the wireless LAN security labels in this screen.
Table 37 Wireless: WPA(2)-PSK
LABEL
DESCRIPTION
Security Mode
Choose WPA-PSK or WPA2-PSK from the drop-down list box.
WPA Compatible
This field is only available for WPA2-PSK. Select this if you want the ZyXEL Device
to support WPA-PSK and WPA2-PSK simultaneously.
to support WPA-PSK and WPA2-PSK simultaneously.
Pre-Shared Key
The encryption mechanisms used for WPA(2) and WPA(2)-PSK are the same. The
only difference between the two is that WPA(2)-PSK uses a simple common
password, instead of user-specific credentials.
only difference between the two is that WPA(2)-PSK uses a simple common
password, instead of user-specific credentials.
Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including
spaces and symbols).
spaces and symbols).
ReAuthentication
Timer (in seconds)
Timer (in seconds)
Specify how often wireless stations have to resend usernames and passwords in
order to stay connected. Enter a time interval between 10 and 9999 seconds. The
default time interval is 1800 seconds (30 minutes).
order to stay connected. Enter a time interval between 10 and 9999 seconds. The
default time interval is 1800 seconds (30 minutes).
Note: If wireless station authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server has
priority.
priority.