Atlantis Land A02-RA210-W54 ユーザーズマニュアル

                                                               ENGLISH

 

23 

First you must connect the product to the ADSL line through the 
RJ11 cable you have in equipment (in the port LINE), then 
connect to the RJ45 ports the PCs of your Lan or others  Switch. 
You can get to the Router through the different client wireless 
compatible with the IEEE802.11b & IEEE802.11g standard. In the 
end connect the feeder to the Wireless Router  ADSL and then to 
the socket. Once you’ve checked all the connections and you’ve 
turned on the Wireless Router ADSL the product will carry on 
immediately a diagnosis (20 seconds). Finished this the Led 
POWER and WLAN (eventually even the Led LAN, if connected 
to PCs) will be fixed green (SYS is blinking when system os 
ready) . The Led ADSL, if suitably connected,  at first will be 
flashing , during the ranging process and then it will remain fixed 
(necessary condition for using the Internet).

 

The Wireless ADSL Router  can be configured with your Web 
browser.  The web browser is included as a standard application in 
following operation systems, UNIX, Linux, Mac OS, Windows 
95/98/NT/2000/Me, etc. The product provides a very easy and 
user-friendly interface for configuration. 

This section describes the configuration required by LAN-attached 
PCs that communicate with the Wireless ADSL Router, either to 
configure the device, or for network access. These PCs must have 
an Ethernet interface installed properly, be connected  to  the                
Wireless Router ADSL   either directly or through an external 
repeater hub, and have TCP/IP installed and configured to obtain 
an IP address through a DHCP server or a fixed IP address that 
must be in the same subnet of the Wireless ADSL Router. The 
default IP address of the Wireless ADSL Router  is 192.168.1.254 
and subnet mask is 255.255.255.0. The best and easy way is to