Siemens S7-400 ユーザーズマニュアル
Analog Modules
5-42
S7-400, M7-400 Programmable Controllers Module Specifications
A5E00069467-07
5.7.2
Parameters of the Analog Output Modules
The analog output modules use a subset of the parameters and ranges of values
listed in the table below, depending on the functionality. Refer to the section on the
module concerned, starting from Section 5.25, to find out which subset the module
is capable of using.
listed in the table below, depending on the functionality. Refer to the section on the
module concerned, starting from Section 5.25, to find out which subset the module
is capable of using.
The default settings apply if you have not performed parameter assignment in
STEP 7.
STEP 7.
Table 5-43 Parameters of the Analog Output Modules
Parameter
Value Range
Default
1
Parameter
Type
Scope
Output
•
Type of output
Disabled
Voltage
Current
Voltage
Current
U
Static
Channel
•
Output range
For the settable measuring ranges of the
output channels, please refer to the
individual module description.
output channels, please refer to the
individual module description.
"
10 V
1)
Only in the CC (central controller) is it possible to start up the analog modules with the default settings.