Siemens S7-400 ユーザーズマニュアル
CPUs for M7-400
11-40
S7-400, M7-400 Programmable Controllers Module Specifications
A5E00069467-07
11.5
I/O Addresses, Main Memory and Interrupt
Assignments
Introduction
This section gives you detailed information, in the form of a table, on the I/O
address space assignment, main memory and interrupt assignments of the CPUs.
address space assignment, main memory and interrupt assignments of the CPUs.
Memory Assignment
The main memory is assigned as follows in the M7-400:
Table 11-8 Main Memory Assignment
Address
Content
1 MB to 15 MB
User memory area
15 MB to 16 MB
PROFIBUS DP*), otherwise free
E 8000H to F FFFFH
BIOS
E 0000H to E 7FFFH
Free (32 K)
D 0000H to D FFFFH
Free (64 K)
C F000H to C FFFFH
Free (4 K)
C C000H to C EFFFH
Memory card, otherwise free (12 K)
C 8000H to C BFFFH
Free (16 K)
C 0000H to C 7FFFH
Shadow VGA BIOS (32 K)
A 0000H to B FFFFH
VGA (128 K)
0 0000H to 9 FFFFH
640 K system area
*)
If the interface submodule IF 964-DP is not plugged in the preferred slot (see Table 13-3
on page 13-4)
on page 13-4)
Keeping Memory Areas Free
The memory areas that are not always marked as “free” should be kept free when
using a memory manager.
using a memory manager.
SRAM Area
The size of the SRAM with battery backup is 64 Kbytes (net for data blocks
56 Kbytes). If the battery is removed and inserted again when there is no power
connected, the SRAM content will be lost. This is indicated by the BAF LED.
56 Kbytes). If the battery is removed and inserted again when there is no power
connected, the SRAM content will be lost. This is indicated by the BAF LED.