3com 3CRWE776075 ユーザーズマニュアル
Supplying Power 15
Supplying Power
Ensure that the power input to your system is clean and free from sags
and surges to avoid unforeseen network outages.
and surges to avoid unforeseen network outages.
Before powering on the switch, verify that the power cable is securely
connected.
connected.
CAUTION: The switch has no On/Off switch; the only method of
connecting or disconnecting main power is by connecting or
disconnecting the power cord.
connecting or disconnecting main power is by connecting or
disconnecting the power cord.
CAUTION: Connect the switch to a properly grounded electrical outlet
using only the supplied power cord.
using only the supplied power cord.
1 Plug the power cord into the power socket on the rear panel of the
switch. See page 8 for more information.
2 Plug the other end of the power cord into a properly-grounded outlet.
When the switch is powered on, the System LED lights. If the System LED
does not light, see “Checking for Correct Operation” on page 16 for
more information.
does not light, see “Checking for Correct Operation” on page 16 for
more information.
Stromversorgung
Stellen Sie sicher, dass der Stromeingang zum System frei ist und vor
Unter- und Überspannungen geschützt ist.
Unter- und Überspannungen geschützt ist.
Bevor Sie den Switch mit Strom versorgen, stellen Sie sicher, dass das
Netzkabel sicher eingesteckt ist.
Netzkabel sicher eingesteckt ist.
WARNUNG: Der Switch hat keinen Ein/Aus-Schalter; die einzige
Methode zum Verbinden oder Trennen vom Stromnetz ist es, das
Netzkabel ein- oder auszustecken.
Methode zum Verbinden oder Trennen vom Stromnetz ist es, das
Netzkabel ein- oder auszustecken.
WARNUNG: Verbinden Sie den Switch nur mit dem mitgelieferten
Netzkabel und einem ordnungsgemäß geerdeten Stromanschluss.
Netzkabel und einem ordnungsgemäß geerdeten Stromanschluss.
1 Stecken Sie das Netzkabel in den Stromanschluss auf der Hinterseite des
Switch. Weitere Informationen finden Sie auf page 8.
2 Stecken Sie das andere Ende des Stromkabels in einen ordnungsgemäß
geerdeten Stromzugang.
Wenn der Switch mit Strom versorgt wird, leuchtet die System-LED.
Wenn die System-LED nicht leuchtet, finden Sie unten weitere
Informationen unter “Checking for Correct Operation” on page 16.
Wenn die System-LED nicht leuchtet, finden Sie unten weitere
Informationen unter “Checking for Correct Operation” on page 16.