ZyXEL Communications 660R-6xC Series ユーザーズマニュアル

Prestige 660R-6xC Series User’s Guide

Chapter 3 Wizard Setup

50

Figure 12   Internet Access Wizard Setup: LAN Configuration

The following table describes the labels in this screen.

Table 8   Internet Access Wizard Setup: LAN Configuration

LAN IP Address

Enter the IP address of your Prestige in dotted decimal notation, for example, 

192.168.1.1 (factory default). 

Note: If you changed the Prestige's LAN IP address, you must 
use the new IP address if you want to access the web 
configurator again.

LAN Subnet Mask

Enter a subnet mask in dotted decimal notation.

DHCP

DHCP Server

From the DHCP Server drop-down list box, select On to allow your Prestige to 

assign IP addresses, an IP default gateway and DNS servers to computer 

systems that support the DHCP client. Select Off to disable DHCP server. 
When DHCP server is used, set the following items:

Client IP Pool Starting 

Address

This field specifies the first of the contiguous addresses in the IP address 

pool.

Size of Client IP Pool

This field specifies the size or count of the IP address pool.

Primary DNS Server

Enter the IP addresses of the DNS servers. The DNS servers are passed to 

the DHCP clients along with the IP address and the subnet mask.

Secondary DNS Server As above.

Back

Click Back to go back to the previous screen.

Finish

Click Finish to save the settings and proceed to the next wizard screen.