Peerless Industries HDS200 ユーザーズマニュアル

30 of 36

ISSUED: 07-24-12 SHEET #: 180-9023-1

Factory Reset

CAUTION

Factory reset will revert all settings to factory defaults. It is not recommended to perform factory reset
on multicast systems (systems that have two or more Receivers). If there are issues with multicast
systems, please reference http://www.hdfl ow.com/Tech-Support or call Technical Support at
1-800-865-2112.

Step 1

Unplug the unit from its power source.

Step 2

Press and hold the Power/Source Selection Button on the front panel. Plug in the DC power back into the unit
being reset.

Step 3

Keep holding the Power/Source Selection Button until the Indicator Lights on the unit are fl ashing rapidly,
approximately 3 seconds.

Step 4

Release the Power/Source Selection Button and wait for the unit to reset to factory defaults.

Please visit http://www.hdfl ow.com/Tech-Support to view factory reset training video.

Firmware Upgrade

Visit http://www.hdfl ow.com/Tech-Support/index.html for Peer-to-Peer and Multicast fi rmware upgrade
instructional videos, fi le downloads and unit confi gurations.

Notes:

HD Flow Pro Wireless Multimedia Kit, Peer-to-Peer units and Multicast units have been pre-confi gured
with the same version of fi rmware. When purchasing additional Receiver(s) it is recommended to check
the fi rmware version.

Firmware update should only be done when units are functioning properly.

During the update, DO NOT TURN THE UNIT OFF OR UNPLUG ITS POWER SOURCE. Doing so will
cause the unit to no longer function properly.

During the update process the display device will not show content.

Only when the unit(s) have fi nished updating and rebooted should the USB dongle be removed.

Appendix