Lucent Technologies merlin messaging system ユーザーズマニュアル
Programming General Mailbox Owner(s)
The MERLIN Messaging System provides four General Mailboxes — one for each Automated Attendant.
The General Mailbox Owner is the extension whose Message-Waiting Light is turned on whenever a message is
placed in the General Mailbox. The factory setting for the General Mailbox Owner is Extension 10. You can
program a different General Mailbox Owner for each General Mailbox or you can have the same owner for all the
placed in the General Mailbox. The factory setting for the General Mailbox Owner is Extension 10. You can
program a different General Mailbox Owner for each General Mailbox or you can have the same owner for all the
Refer to System Planning Planning Form 1 – System Parameters for the General Mailbox
Owner extension(s) identified for your site.
Owner extension(s) identified for your site.
To program the General Mailbox Owner(s):
Step Programming Task
Touch-Tone Input
1
2
Select System Parameters
3
Select General Mailbox Owner
4
Enter Automated Attendant number
-
5
Enter General Mailbox Owner's extension
[nnn]
6
Repeat Steps 3–5 for each Automated Attendant
Procedures
Programming System Language Mode and System Language
Programming System Date and Time
Programming Maximum Extension Length
Programming Call Answer Service Operator Extension
Programming System Date and Time
Programming Maximum Extension Length
Programming Call Answer Service Operator Extension
Programming General Mailbox Owner(s)
http://www.sostc.com/lucent/installation/prog_merlin_mess/mmipcpmm8.htm [2/2/2000 2:32:36 PM]