Lucent Technologies merlin messaging system ユーザーズマニュアル

Use this procedure to do the following:

Specify the MERLIN Messaging System Calling Group as the overflow receiver for the Delayed Call
Handling Calling Group.

●   

Change the factory setting for the Number-Based Overflow from 1 to 99 calls.

●   

Set the Time-Based Overflow threshold to the appropriate setting (approximately 5 seconds for each
ring). For example, if you want a call to ring at the DLC System Operator's position 5 times before
being transferred, set the Time-Based Overflow to 25 seconds.

●   

Keep the factory settings for the Calling Group type
(AutoLogout) and hunt type (circular).

 

[nnn]

Enter programming mode

 Sys Program

 Exit/Start

 

[any

key]

Select Extensions

Extensions

Display next page of menu

Select Group Calling

 Grp Calling

Select Overflow

 Overflow

Enter extension number of Delayed
Call Handling Calling Group

[nnn]

 Enter

[nnn]

Erase current overflow receiver
extension, if assigned

 Drop

 + 

Enter extension for the MERLIN
Messaging System Calling Group

[nnn]

 Enter

[nnn]

Select Number-Based Overflow

 Number Based

Overflow

Erase the current number of calls

 Drop

 + 

Enter the highest setting (to ensure
calls go to overflow based on time
and not number of calls)

[99]

 Enter

[99]

Select Time-Based Overflow

 Time Based

Overflow

Providing Overflow Coverage to MERLIN Messaging System for the Delayed Call Handling Calling Group

http://www.sostc.com/lucent/installation/programming_the_communication_system/provovercov.htm (1 of 2) [2/2/2000 2:33:43 PM]