Lucent Technologies merlin messaging system ユーザーズマニュアル
Programming a Delete Message Button
For all multiline telephones except MLX
The Delete Message feature turns off a user’s Message-Waiting light and deletes the label that appears on the
display. It does not delete voice mail messages. This feature can be programmed at the user’s telephone or
through Centralized Telephone Programming. The Centralized Telephone Programming procedure is
documented below.
display. It does not delete voice mail messages. This feature can be programmed at the user’s telephone or
through Centralized Telephone Programming. The Centralized Telephone Programming procedure is
documented below.
To program a Delete Message button:
Step
Programming Task
Console Input/Selection
PC Input/Selection
1
Enter Programming mode
Sys Program
Exit/Start
[any key]
2
Display next page of menu
/
3
Select Centralized Telephone
Programming
Programming
Cntr-Prg
4
Select Program Extension
Program Ext
5
Enter the extension you want to
program
program
[nnn]
Enter
[nnn]
6
Start Centralized Telephone
Programming
Programming
Start
7
Select line/feature button
Press button on console
or
+
function key, then
8
Select Message Delete feature
or
ListFeature
/
/
MsgDelete
or
Function key
corresponding to
MsgDelete
corresponding to
MsgDelete
Programming a Delete Message Button
http://www.sostc.com/lucent/installation/programming_the_communication_system/mmipcpcs9b.htm (1 of 2) [2/2/2000 2:34:01 PM]