Multi-Tech Systems MT5634ZPX-PCI-U-NV ユーザーズマニュアル
3 Remote Configuration
16
MultiModemZPX User Guide
To Change the Remote Escape Character
To further improve security, you can change a remote modem’s remote configuration escape character ei-
ther locally or remotely. The remote configuration escape character is stored in register S9. The factory
default is 37, which is the ASCII code for the percent character (%). Setting S9 to 0 (zero) disables remote
configuration entirely.
ther locally or remotely. The remote configuration escape character is stored in register S9. The factory
default is 37, which is the ASCII code for the percent character (%). Setting S9 to 0 (zero) disables remote
configuration entirely.
CAUTION:
If you do this remotely, you won’t be able to change it back remotely.
1.
Establish a remote configuration link with the remote modem as described in “Basic Procedure.”
2.
Type ATS9=n, where n is the ASCII code for the new remote configuration escape character, and
then press E
NTER
.
3.
Save the new value by typing AT&W and pressing E
NTER
.
4.
Type ATO and press E
NTER
to exit remote configuration.