ZyXEL Communications 4.04 ユーザーズマニュアル

Chapter 23 WWAN Commands

ZyWALL (ZyNOS) CLI Reference Guide

wwan config budgetCtrl data dir 

[1|2|3]

Sets whether either transmitted (Tx) or received (Rx), or both 
Tx/Rx data should be counted for budget purposes.
1:Tx
2:Rx
3:Tx and Rx

R

wwan config budgetCtrl data 

enable [on|off]

Enables the recording of the amount of Tx/Rx data. This 
information is used for budget management.

R

wwan config budgetCtrl data quota 

[data_quota]

Sets the data limit measured in megabytes. data_quota may 
be between 1 Mb to 100 Gb.

R

wwan config budgetCtrl enable 

[on|off]

Enables budget control. 

R

wwan config budgetCtrl highLimit

Sets the upper limit for the data budget. 

R

wwan config budgetCtrl highLimit 

alert [on|off]

Sends an alert if the data limit is exceeded.

R

wwan config budgetCtrl highLimit 

AllowNewConn [on|off]

Allows new 3G connections to be established when the data 
limit is exceeded.

R

wwan config budgetCtrl highLimit 

KeepCurrConn [on|off]

Keeps the current 3G connection (ON) or drops it (OFF) if the 
data limit is exceeded.

R

wwan config budgetCtrl highLimit 

log [on|off]

Sends a log if the data limit is exceeded.

R

wwan config budgetCtrl lowLimit

Sets a data level at which to send an alert or log before the 
maximum data limit is reached.

R

wwan config budgetCtrl lowLimit 

alert [on|off

]

Sends an alert if the warning level is reached. 

R

wwan config budgetCtrl lowLimit 

data <%>

Sets a warning level as a percentage of the data limit.

R

wwan config budgetCtrl lowLimit 

log [on|off]

Sends a log if the warning level is exceeded.

R

wwan config budgetCtrl lowLimit 

time <%>

Sets a time for a warning as a percentage of the Internet 
access time limit.

R

wwan config budgetCtrl resetDay 

<day>

Sets the day of each month to reset the budget counter.

R

wwan config budgetCtrl time 

enable [on|off]

Enables the recording of time spent accessing the Internet for 
budget control.

R

wwan config budgetCtrl time quota 

[time_in_hours]

Sets the time limit for Internet access in hours. Maximum is 672 
hours.

R

wwan config enable [on|off]

Enables 3G Wireless WAN.

R

wwan config idleTimeout 

<time_in_seconds>

Sets the maximum period the connection may remain idle 
before disconnection. time_in_seconds may be 1-9999 
seconds.

R

wwan config multicast enable 

[on|off]

Enables multicast for 3G wireless WAN.

R

wwan config multicast version 

[1|2]

Sets multicast to IGMP (Internet Group Management Protocol) 
version 1 or 2.
1:IGMPv1
2:IGMPv2

R

Table 86   wwan Command Summary (continued)