ZyXEL Communications 4.04 ユーザーズマニュアル

ZyWALL (ZyNOS) CLI Reference Guide

Use these commands to configure certificates.

The following table describes the values required for many certificates commands. 
Other values are discussed with the corresponding commands.

Table 23   Certificates Commands Input Values

Specifies the certificate’s key for user authentication. If the key contains spaces, 
put it in quotes. To leave it blank, type "".

The IP address or domain name of the CA (Certification Authority) server. 

The name of the CA certificate. 

address[:port

]

Specifies the server address (required) and port (optional). The format is "server-
address[:port]". The default port is 389. 

The length of the key to use in creating a certificate or certificate request. Valid 
options are 512, 768, 1024, 1536 and 2048 bits. 

login:pswd 

The login name and password for the directory server, if required. The format is 
"login:password".

The identifying name of a certificate or certification request. Use up to 31 
characters to identify a certificate. You may use any character (not including 
spaces).

The address and port of an optional HTTP proxy to use. 

A descriptive name for a directory server. Use up to 31 ASCII characters (spaces 
are not permitted).

A certificate’s subject name and alternative name. Both are required.
The format is "subject-name-dn;{ip,dns,email}=value".
Example 1: "CN=ZyWALL,OU=CPE SW2,O=ZyXEL,C=TW;ip=172.21.177.79"
Example 2: "CN=ZyWALL,O=ZyXEL,C=TW;dns=www.zyxel.com"
Example 3: "CN=ZyWALL,O=ZyXEL,C=TW;email=dummy@zyxel.com.tw"
If the name contains spaces, put it in quotes.

The verification timeout value in seconds (optional). The default timeout value is 
20 seconds.

The location of a certificate to be imported.