Multi-Tech Systems MVP210-SS ユーザーズマニュアル
MultiVOIP User Guide
Technical Configuration
117
Voice/Fax Parameter Definitions (cont’d)
Field Name
Valuee
Description
FAX Parameters
(cont’d)
Fax Volume
(
Default =
-9.5 dB
)
-18.5 dB
to –3.5 dB
to –3.5 dB
Controls output level of fax tones. To
be changed only under the direction of
Multi-Tech’s Technical Support.
be changed only under the direction of
Multi-Tech’s Technical Support.
Jitter Value
(Fax)
Default =
400 ms
Defines the inter-arrival packet
deviation (in milliseconds) for the fax
transmission. A higher value will
increase the delay, allowing a higher
percentage of packets to be
reassembled. A lower value will
decrease the delay allowing fewer
packets to be reassembled.
deviation (in milliseconds) for the fax
transmission. A higher value will
increase the delay, allowing a higher
percentage of packets to be
reassembled. A lower value will
decrease the delay allowing fewer
packets to be reassembled.
Mode (Fax) FRF 11;
T.38
(T.38 not
currently
sup-
ported)
FRF11
is frame-relay FAX standard using
these coders: G.711, G.728, G.729, G.723.1.
T.38 is an ITU-T standard for storing
and forwarding FAXes via email using
X.25 packets. It uses T.30 fax standards
and includes special provisions to
preclude FAX timeouts during IP
transmissions.
and forwarding FAXes via email using
X.25 packets. It uses T.30 fax standards
and includes special provisions to
preclude FAX timeouts during IP
transmissions.