Multi-Tech Systems MVP210-SS ユーザーズマニュアル
MultiVOIP User Guide
Technical Configuration
131
FXS Loop Start Interface: Parameter Definitions (cont’d)
Field Name
Values
Description
Flash Hook Options fields
Generation
--
not applicable to FXS interface
Detection
Range
Range
for
Min
.
and
Max
.,
50 - 1500
milliseconds
milliseconds
For a received flash hook to be
regarded as such by the
MultiVOIP, its duration must
fall between the minimum and
maximum values given here.
regarded as such by the
MultiVOIP, its duration must
fall between the minimum and
maximum values given here.
Pass Through
Enable
Enable
Y/N
When enabled, this parameter
creates an open audio path
through the MultiVOIP.
If the Pass-Through feature is
enabled, the AutoCall feature
must be enabled for this voip
channel in the Voice/Fax
Parameters screen.
creates an open audio path
through the MultiVOIP.
If the Pass-Through feature is
enabled, the AutoCall feature
must be enabled for this voip
channel in the Voice/Fax
Parameters screen.
Caller ID fields
Type Bellcore The MultiVOIP currently
supports only one
implementation of Caller ID.
That implementation is Bellcore
type 1 with Caller ID placed
between the first and second
rings of the call.
implementation of Caller ID.
That implementation is Bellcore
type 1 with Caller ID placed
between the first and second
rings of the call.
Enable Y/N
Caller ID information is a
description of the remote
calling party received by the
called party. The description
has three parts: name of caller,
phone number of caller, and
time of call. The ‘time-of-call’
portion is always generated by
the receiving MultiVOIP unit
(on FXS channel) based on its
date and time setup.
description of the remote
calling party received by the
called party. The description
has three parts: name of caller,
phone number of caller, and
time of call. The ‘time-of-call’
portion is always generated by
the receiving MultiVOIP unit
(on FXS channel) based on its
date and time setup.