Multi-Tech Systems MVP210-SS ユーザーズマニュアル

 

 

 

 

 

 

 

 

Generation 

50 - 1500 
milliseconds 

Length of flash hook that will 
be generated and sent out when 
the remote end initiates a flash 
hook and it is regenerated 
locally.  Default = 600 ms.  

Detection 
Range 

-- 

Not applicable to FXO.  

 

 

Caller ID Type 

Bellcore 

The MultiVOIP currently 
supports only one 
implementation of Caller ID.  
That implementation is Bellcore 
type 1 with caller ID placed 
between the first and second 
rings of the call.  

Caller ID 
enable 

Y/N 

Caller ID information is a 
description of the remote 
calling party received by the 
called party.  The description 
has three parts:  name of caller, 
phone number of caller, and 
time of call. The ‘time-of-call’ 
portion is always generated by 
the receiving MultiVOIP unit 
(on FXS channel) based on its 
date and time setup. The forms 
of the ‘Caller Name’ and ‘Caller 
Phone Number’ differ 
depending on the IP 
transmission protocol used 
(H.323, SIP, or SPP) and upon 
entries in the phonebook 
screens of the remote (CID 
generating) voip unit.  The CID 
Name and Number appearing 
on the phone at the terminating 
FXS end will come either from a 
central office switch (showing a 
PSTN phone number), or the 
phonebook of the remote (CID 
sending) voip unit.