Multi-Tech Systems MVP210-SS ユーザーズマニュアル

 

      

 

There are four possible criteria 
for disconnection under FXO: 
current reversal, current loss, 
tone detection, and silence 
detection.  Disconnection can be 
triggered by more than one of 
the three criteria. 

Current 
Reversal 

Y/N 

Disconnection to be triggered 
by reversal of current from the 
PBX. 

Current Loss 

Y/N 

Disconnection to be triggered 
by loss of current.  That is, 
when Current Loss is enabled 
(“Y”), the MultiVOIP will hang 
up the call at a specified 
interval after it detects a loss of 
current initiated by the attached 
device. 

Current Loss 
Timer 

200 to 2000 
(in milliseconds) 

Determines the interval after 
detection of current loss at which 
the call will be disconnected. 

Silence 
Detection 
Enable 

Y/N Enables/disables 

silence-

detection method of 
supervising call disconnection. 

Silence 
Detection Type 

One-Way or  
Two-Way 

Disconnection to be triggered 
by silence in one direction only 
or in both directions 
simultaneously. 

Silence Timer 
in seconds 

integer value 

Duration of silence required to 
trigger disconnection.