Multi-Tech Systems MVP210-SS ユーザーズマニュアル

337 

5. After the PC gets a response from the MultiVOIP, the Dialog – IP 

Parameters screen will appear.   

 

The user should verify that the correct IP parameter values are listed 

on the screen and revise them if necessary. Then click OK. 

6. Progress bars will appear at the bottom of the screen during the data 

transfer.  

 

The MultiVOIP’s “Boot” LED will turn off at the end of the  transfer. 

7. The  Download Factory Defaults procedure is complete. 
 

The Interface Module (IFM) is the telephony interface for analog 

MultiVOIP units (MVP130, MVP130FXS, MVP210, MVP410, MVP810).  

There is one IFM for each channel of the MultiVOIP unit.  For each 

channel, the IFM handles the analog signals to and from the attached 

telephone, PBX or CO line. The IFM communicates with the main 

processor indicating the status of the telephone line.  For example, it