Multi-Tech Systems MVP210-SS ユーザーズマニュアル

 

Write down the values for these IP parameters.  You will need to enter 

these values in the “IP Parameters” screen in the Configuration section 

of the MultiVOIP software.  You must have this IP information about 

every VOIP in the system. 

The following parameters must be known about the PBX or telco 

central office equipment to which the analog MultiVOIP will connect:  

  Phone Parameters 

 

 

Telephony Interface Parameters:

Record for this VOIP Site

#

 

 

•  Which interface type is to be used?  

   

E&M

_____    

FXS/FXO

_____   DIP/DPO _____  

 

•  If FXS, determine whether the line will be used for a 

phone, fax, or KTS (key telephone system)  

 

• If FXO, determine if line will be an analog PBX 

extension or an analog line from a telco central office  

 

• If E&M, determine these aspects of the  E&M trunk 

line from the PBX:  

• What is its Type (1, 2, 3, 4, or 5)? 

• Is it 2-wire or 4-wire? 

• Is it Dial Tone or Wink?