Corinex Global GameNet ユーザーズマニュアル

Corinex AV200 Powerline Wall Mount F

Corinex AV200 Powerline Wall Mount F

Home Electrical Wiring

HDTV

Set-Top Box

Computer/ Media Center PC

 • 

Public Network - This is the default configuration of an In-Home network. If 

    you do not want to change the settings on your network, the network
 

  configuration protocol will configure all the adapters automatically. By default,

    all adapters are EPs and have a public (empty) network ID. If the protocol
    does not detect an AP in the channel, it will change an EP to act as an AP. All
    EPs will connect directly to the automatic AP if they can, or to an EP that will
    act as a repeater. Then the network will be established.

 • 

Private Network - To configure a private network (to ensure data privacy), 

    a network ID must be assigned to all adapters on the network using the 
    configuration tool. It is recommended to configure a fixed AP (for 
 

  example the adapter with the video server or Internet access). If the fixed AP is 

    turned off or is not defined, the network configuration protocol 
    will select an EP to change to function as an AP (automatic), in order to
    configure the network.

The following two sections show examples of a single In-Home AV network. 

The picture below shows a simple PLC (Powerline) network where two wall mount 
adapters are used to make a local area connection available to all outlets of the 
house. This is the simplest type of network, where no QoS (Quality of Service) 
configuration is required.