Motorola SBG940 ユーザーズマニュアル
44
SBG940 User Guide
X
Exit
Print
Gateway > LAN — dhcp server config Page
Only experienced network administrators should use this page to perform advanced DHCP server configuration:
CAUTION!
Do not modify these settings unless you are an experienced network administrator with strong
knowledge of IP addressing, subnetting, and DHCP.
knowledge of IP addressing, subnetting, and DHCP.
Gateway > LAN — dhcp server config page fields
Field
Description
LAN IP Address
You can type the IP address of the SBG940 for your private LAN. The default is
192.168.0.1.
192.168.0.1.
LAN IP Subnet Mask
Displays the subnet mask in dotted-decimal format. The default is 255.255.255.0.
Starting IP Address
Enter the starting IP address to be assigned by the SBG940 DHCP server to clients in
dotted-decimal format. The default is 192.168.0.2.
dotted-decimal format. The default is 192.168.0.2.
# of DHCP Users
Sets the number of clients for the SBG940 DHCP server to assign a private IP address.
There are 253 possible client addresses. The default is 253.
There are 253 possible client addresses. The default is 253.
DHCP Server Lease Time Sets the time in seconds that the SBG940 DHCP server leases an IP address to a client.
The default is 3600 seconds (60 minutes).
Domain Name
Sets the domain name for the SBG940 LAN. The default is None.
Time To Live
Sets the TTL (hop limit) for outbound packets. The default is 64.
Interface Maximum
Transmission Unit
Transmission Unit
Sets the SBG940 LAN MTU in bytes. The minimum is 68 bytes. The default is 1500 bytes.
Apply
Click to apply your changes. You must reboot the SBG940.