Motorola SBG940 ユーザーズマニュアル
76
SBG940 User Guide
X
Exit
Print
Configuring the Wireless Clients
For each wireless client computer (station), install the wireless adapter — such as a Motorola
, or WU830G — following the instructions supplied with the adapter. Be sure to:
1
Insert the CD-ROM for the adapter in the CD-ROM drive on the client.
2
Install the device software from the CD.
3
Insert the adapter in the PCMCIA or PCI slot or connect it to the USB port.
Configure the adapter to obtain an IP address automatically. The Motorola wireless adapters are supplied with a
client configuration program called Wireless Client Manager, which is installed in the Windows Startup group.
client configuration program called Wireless Client Manager, which is installed in the Windows Startup group.
On a PC with Wireless Client Manager installed, the
icon is displayed on the Windows task bar. Double-click
the icon to launch the utility.
You may need to do the following to use a wireless client computer to surf the Internet:
If You Performed
On Each Client, You Need to Perform
Configuring the Wireless Network Name on the SBG940 Configuring a Wireless Client with the Network Name
No configuration on client required
Step 1
Step 1
Step 2
Step 2
Step 3
Step 3