Motorola SBG940 ユーザーズマニュアル
79
SBG940 User Guide
X
Exit
Print
Wireless > STATUS Page
You can use this display-only page to:
•
View the wireless interface status
•
for wireless network problems
Wireless > STATUS Page Fields
Regulatory Domain
Indicates the country the SBG940 is manufactured for. The list of channels depends on the
country’s standards for operation of wireless devi
country’s standards for operation of wireless devi
ces. Depending on the domain set at the factory,
USA FCC, Europe, Spain, France, Japan, or some other country name is displayed.
ESSID
. For more information, see
”. Never provide the ESSID to anyone
who is not authorized to use your WLAN.
Channel
Displays the radio channel for the access point. If you encounter interference, you can set a
different channel on the Wireless > NETWORK Page.
different channel on the Wireless > NETWORK Page.
RTS Threshold
Displays the Request to Send Threshold set on the Wireless > NETWORK Page.
Frag Threshold
Displays the Fragmentation Threshold set on the Wireless > NETWORK Page.
MAC Address
Displays the SBG940 MAC address.
Security Mode
Displays the enabled wireless encryption type. For more information, see “
MAC Access Control
Displays the MAC Access Control setting (see “
”):
•
Allow Listed — Only clients in the MAC access control list can access the WLAN.
•
Allow Any Station Access — Any wireless client can access the WLAN.
MAC Access Control List Displays the MAC addresses of wireless clients having access (see “
”).