RCA 516 ユーザーズマニュアル
Chapter 1
Your SpeedTouch™
E-DOC-CTC-20050429-0098 v1.0
11
1.3.2 Access via CLI
Command Line
Interface (CLI)
You can access the Command Line Interface (CLI) via:
A Telnet session
This requires that TCP/IP connectivity exists between the host from which the
Telnet session is opened and the SpeedTouch™. Your SpeedTouch™ and the
connected PC must have an IP address in the same subnet.
This requires that TCP/IP connectivity exists between the host from which the
Telnet session is opened and the SpeedTouch™. Your SpeedTouch™ and the
connected PC must have an IP address in the same subnet.
Quote site commands (over FTP)
For more information, see
For more information, see
For information on CLI commands, see the SpeedTouch™ CLI Reference Guide.