HP (Hewlett-Packard) NC373F ユーザーズマニュアル

 

Installing an adapter  10 

1. 

Using a correctly sized slotted screwdriver, carefully remove the two board lock screws located at 

the top and bottom of the connector. 

2. 

Remove the standard profile bracket and place the low profile bracket over the connector. Be careful 
not to damage the connector or bind the low profile bracket to the connector. 

 

Connecting the network cable 

The HP NC373F PCI Express Multifunction Gigabit Server Adapter uses an LC fiber port. This port 

supports multimode fiber with a maximum cable length dependent on the fiber type, mode, and cable 
size. See Specifications (on page 

) for the maximum cable length. 

To insert the LC connector into the adapter port, line up the slot on the fiber connector with the adapter 

and gently push until the retainers click into place.