Enfora GPRS ユーザーズマニュアル

ページ / 23
GSM/GPRS Spider SA User Manual 
 
 
GSM0000PB001MAN 
Version 1.07 - 02/14/05 
 
 
3.2  Connecting the Power Supply 
 
The GSM/GPRS Spider SA modem can utilize input power ranging from 5 Vdc to 
30 Vdc.  If your unit did not include a power supply or if you wish to configure a 
separate power interface, the following connector parts can be used to mate with 
the existing modem power connector: 
 
Connector Pins - 
Molex 39-00-0207 MINIFIT TERM CRP FEM CHN BS TIN 18-24 
 
Plastic Housing - 
Molex 39-01-2020 4.20mm (.165") Pitch Mini-Fit, Jr.™ Receptacle, Dual 
Row (the Enfora GSM/GPRS Spider SA incorporates a 2-pin configuration)
 
 
WARNING: 
When assembling the Molex connector, plug the Positive (+) 
power lead in the bottom of the Molex connector. Improper 
connections will render the unit inoperable and will void the product warranty. 
 
Proper Molex Configuration
 
 
  
 
  (
-
)Power Lead 
 
  
(+)Power Lead 
TM
 
 
 
To supply power to the GSM/GPRS Spider SA modem, connect the power 
supply to the power connector (labeled “Power”) on the modem.  Connect the 
other end of the power cable to a power source. 
 
Note: Make sure the SIM card is inserted prior to connecting the power supply to 
the Spider SA. 
 
Figure 4: Connecting The Power Supply To Spider SA