DELL 9.7(0.0) ユーザーズマニュアル

Dell(conf)#line vty 0

Dell(config-line-vty)#?

exit                Exit from line configuration mode

Dell(config-line-vty)#

Applying a Privilege Level to a Username

To set the user privilege level, use the following command.

• Configure a privilege level for a user.

CONFIGURATION mode

username username privilege level

Applying a Privilege Level to a Terminal Line

To set a privilege level for a terminal line, use the following command.

• Configure a privilege level for a user.

CONFIGURATION mode

username username privilege level

NOTE: When you assign a privilege level between 2 and 15, access to the system begins at EXEC 

mode, but the prompt is hostname#, rather than hostname>.

Configuring Logging

The Dell Networking operating system tracks changes in the system using event and error messages.

By default, the operating system logs these messages on:

• the internal buffer
• console and terminal lines
• any configured syslog servers

To disable logging, use the following commands.

• Disable all logging except on the console.

CONFIGURATION mode

no logging on

• Disable logging to the logging buffer.

CONFIGURATION mode

no logging buffer

• Disable logging to terminal lines.

CONFIGURATION mode

no logging monitor

• Disable console logging.

CONFIGURATION mode

no logging console

58

Switch Management