Toshiba NB200 ユーザーズマニュアル

User’s Manual

3-11

Getting Started

3. Press the power button. This feature must be enabled.
When you turn the power back on, you can continue where you left when 

you shut down the computer. 

Standby Mode will not function under the following conditions:

■

Power is turned back on immediately after shutting down.

■

Memory circuits are exposed to static electricity or electrical noise.

Certain conditions require that you reset the computer, for example if:

■

You change certain computer settings.

■

An error occurs and the computer does not respond to your keyboard 

commands.

If you need to restart the computer, there are two ways this can be 

achieved:
1. Click Start then click Turn Off Computer. From the Turn Off Computer 

menu select Restart.

2. Press the power button and hold it down for five seconds. Wait ten to 

fifteen seconds, then turn on the power again by pressing the power 

button.

■

When the computer is in Standby Mode, the Power indicator will blink 

■

■

■