Toshiba NB200 ユーザーズマニュアル

User’s Manual

6-3

Power and Power-up Modes

Check the DC IN indicator to determine the power status with the AC 

adaptor connected - the following indicator conditions should be noted:

Check the Power indicator to determine the power status of the computer - 

the following indicator conditions should be noted:

The computer has two different types of batteries:

■

Battery pack 

■

Real Time Clock (RTC) battery

When the AC adaptor is not connected, the computer's main power source 

is a removable lithium ion battery pack, also referred to in this manual as 

the battery. You can purchase additional battery packs for extended use of 

the computer away from an AC power source although you should not 

change the battery pack while the AC adaptor is connected.
Before you remove the battery pack, save your data and shut down the 

computer, or place the computer into Hibernation Mode. Please be aware 

that, when placing the computer into Hibernation Mode, the contents of 

memory will be saved to the hard disk drive, although for safety sake, it is 

best to also save your data manually.

Indicates the AC adaptor is connected and is 

correctly supplying power to the computer.

Under any other conditions, the indicator does not 

light.

Indicates power is being supplied to the computer 

and the computer is turned on.

Indicates that the computer is in Standby Mode 

and that there is sufficient power available (AC 

adaptor or battery) to maintain this condition. In 

Standby Mode, this indicator will turn on for two 

seconds and off for two seconds.

Under any other conditions, the indicator does 

not light.