Atlantis Land i I-Fly Wireless Access Point ユーザーズマニュアル
19
MAC Filter: MAC Filter function controls the MAC of the network devices that are listed in this
table for access authorization or denial.
When MAC Filter is enabled, by selecting the “Enabled” radio box, select one of two choices:
Only deny PCs with MAC listed below to access device
Only allow PCs with MAC listed below to access device
Only allow PCs with MAC listed below to access device
The maximum number of MAC addresses that can be stored is 50. You can browse through the
MAC address saved by selecting the drop-down box.
For any changes made in the security page, click “Apply” for the changes to be active.
MAC address saved by selecting the drop-down box.
For any changes made in the security page, click “Apply” for the changes to be active.
3.7.6 802.1x
There are three essential components to the 802.1x infrastructure: (1) Supplicant, (2)
Authenticator and (3) Server. The Access Point serves as an Authenticator, and the EAP methods
used must be supported by the backend Radius Server. The 802.1x security supports MD5 and
TLS Extensive Authentication Protocol (EAP). Please follow the steps below to configure 802.1x
security.
Authenticator and (3) Server. The Access Point serves as an Authenticator, and the EAP methods
used must be supported by the backend Radius Server. The 802.1x security supports MD5 and
TLS Extensive Authentication Protocol (EAP). Please follow the steps below to configure 802.1x
security.