Atlantis Land i I-Fly Wireless Access Point ユーザーズマニュアル

27 

 

•  Data Encryption: please tick it if you like to have WEP key as the encryption mechanism.  

•  Authentication Mode: The authentication type default is set to open system. There are 

four options: open system; shared key; WPA; WPA-PKS. You may want to set to Shared 
Key when the clients and AP in the same wireless network enable the WEP encryption. All 
the nodes and hosts on the network must use the same authentication type. 

•  WEP Key: To disable WEP security, click on the “Disable” option. To enable WEPsecurity, 

there are 2 types to select – 64bits and 128 bits. When it is selected, the key value must be 
entered in ASCII or HEX format. There are four key sets are available to assign.  

When WEP security is enabled, all the wireless clients that wish to connect to the 

Access Point must also have WEP enabled with the identical WEP Key value entered. 

•  WPA:  WPA is available in authentication mode as the below screen. It is required to set 

802.1X setting first before you use WPA.  

•  WPA-PSK (Pre Shared Key mode): WPA is available in authentication mode as the 

below screen. It is required to set 802.1X setting first before you use WPA.  If WPA-PSK 
is enabled, users need to set the key in the passphrase field as the below screen. The key 
length should be 8 characters at least.