NDC comm NWH4020 ユーザーズマニュアル
InstantWave
11-Mbps USB Wireless LAN Adapter
1
Introduction
Thank you for choosing an InstantWave 11-Mbps wireless networking product.
This guide gives complete instructions on installing and using the InstantWave
NWH4020 11-Mbps USB wireless LAN adapter, and also explains how to install
and use the InstantWave utility program included with the adapter.
This guide gives complete instructions on installing and using the InstantWave
NWH4020 11-Mbps USB wireless LAN adapter, and also explains how to install
and use the InstantWave utility program included with the adapter.
The NWH4020 is part of a family of easy-to-use high-performance wireless
communication products. This family of products includes:
communication products. This family of products includes:
•
InstantWave 11-Mbps Wireless Access Point (NWH650)
•
InstantWave 11-Mbps Wireless Access Point (NWH660)
•
InstantWave 11-Mbps Wireless Workgroup Bridge (NWH6210)
•
InstantWave 11-Mbps Wireless Building-to-Building Bridge (NWH6110)
•
InstantWave 11-Mbps Wireless Ethernet Clients (NWH2210, NWH2610)
•
InstantWave 11-Mbps Wireless Secure Router (NWH8010)
•
InstantWave 11-Mbps Wireless PC Card (NWH1010)
•
InstantWave 11-Mbps Wireless PCI Card (NWH630)
System Requirements
Hardware
The host machine must be an IBM-type x86-based microcomputer with a USB
(Universal Serial Bus) interface. A 3.5-inch floppy-disk drive is required for
installation of the adapter driver and utility. Other resources must be sufficient to
run one of the environments for which the driver and utility were designed (see
next).
(Universal Serial Bus) interface. A 3.5-inch floppy-disk drive is required for
installation of the adapter driver and utility. Other resources must be sufficient to
run one of the environments for which the driver and utility were designed (see
next).
Software
The driver and utility included with the adapter will run in Microsoft
®
Windows 98,
ME, 2000, or XP.