Seagate ST2000NM0054 ユーザーズマニュアル

Seagate Enterprise Capacity 3.5 HDD v4 SAS Product Manual, Rev. C

  7

  

The drives documented in this manual have been developed as system peripherals to the highest standards of design and construction. 
The drives depends on host equipment to provide adequate power and environment for optimum performance and compliance with 
applicable industry and governmental regulations. Special attention must be given in the areas of safety, power distribution, shielding, 
audible noise control, and temperature regulation. In particular, the drive must be securely mounted to guarantee the specified 
performance characteristics. Mounting by bottom holes must meet the requirements of Section 10.3.

The Enterprise Capacity 3.5 HDD v4 family complies with Seagate standards as noted in the appropriate sections of this manual and the 
Seagate SAS Interface Manual, part number 100293071.

The drives are recognized in accordance with UL 60950-1 as tested by UL, CSA 60950-1 as tested by CSA, and EN60950-1 as tested by 
TUV.

The security features of Self-Encrypting Drive models are based on the “TCG Storage Architecture Core Specification” and the “TCG 
Storage Workgroup Security Subsystem Class: Enterprise_A” specification with additional vendor-unique features as noted in this product 
manual.

The drive, as delivered, is designed for system integration and installation into a suitable enclosure prior to use. The drive is supplied as a 
subassembly and is not subject to Subpart B of Part 15 of the FCC Rules and Regulations nor the Radio Interference Regulations of the 
Canadian Department of Communications.

The design characteristics of the drive serve to minimize radiation when installed in an enclosure that provides reasonable shielding. The 
drive is capable of meeting the Class B limits of the FCC Rules and Regulations of the Canadian Department of Communications when 
properly packaged; however, it is the user’s responsibility to assure that the drive meets the appropriate EMI requirements in their system. 
Shielded I/O cables may be required if the enclosure does not provide adequate shielding. If the I/O cables are external to the enclosure, 
shielded cables should be used, with the shields grounded to the enclosure and to the host controller.

As a component assembly, the drive is not required to meet any susceptibility performance requirements. It is the responsibility of those 

integrating the drive within their systems to perform those tests required and design their system to ensure that equipment operating in the 
same system as the drive or external to the system does not adversely affect the performance of the drive. See Table 1, DC power 
requirements.

Seagate uses an independent laboratory to confirm compliance with the directives/standards for CE Marking and C-Tick Marking. The 
drive was tested in a representative system for typical applications. The selected system represents the most popular characteristics for 
test platforms. The system configurations include:
• Typical current use microprocessor
• Keyboard
• Monitor/display
• Printer
• Mouse

Although the test system with this Seagate model complies with the directives/standards, we cannot guarantee that all systems will comply. 

The computer manufacturer or system integrator shall confirm EMC compliance and provide the appropriate marking for their product.

If this model has the CE Marking it complies with the European Union requirements of the Electromagnetic Compatibility Directive 2004/
108/EC as put into place on 20 July 2007.

If this model has the ICES-003 Marking it complies with the Canadian Standard Association Standard CAN/CSA-CISPR 22-10, Information 
Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement.

If this model has the RCM Marking it complies with the Australia/New Zealand Standard AS/NZ CISPR22 and meets the Electromagnetic 
Compatibility (EMC) Framework requirements of Australia’s Radiocommunications Act.